03:06am Saturday 19th May 2012

Connector Piece Parts

Latest News

Understanding Wiring Harnesses

Wiring Harnesses, also known as cable harnesses or cable assemblies is a carefully designed series of electrical cables bound together with cable ties / plastic sleeving and generally with connectors or prepared wires on each end. read full story >>>

Inconnect develops off-shore manufacturing capability

For many years UK OEM’s have faced a difficult choice, pay over the odds for a high quality cable harness product made by a UK manufacturer, or go direct to the Far east and get a lower cost product but face uncertainty about the service and quality levels they will experience. read full story >>>

Accreditations

 

4-Way Connector Housing

Part Number: MLD-PLG-PG4

4 way connector housing. Mates with MLD-REC-PG4, suitable for crimp terminals CON-PT-STD-1.0 in two of the 4 ways and crimp terminals CON-PT-MAX-4.0/6.0/10.0 in the other 2 ways. Selection of crimp terminal will depend on wire size used. Refer to Terminal listing for more details

Please note - there is a minimum order quantity of 100 pieces on this part.

 Product Drawing

2-Way Connector Housing

Part Number: MLD-PLG-PG2

2 way connector housing, suitable for housing crimp terminals CON-PT-MAX-4.0/6.0/10.0. Mates with MLD-REC-PG2, the selection of crimp terminal to be used will depend on wire csa. Refer to Terminal listing for more details

 PDF Drawing

 

Intech connector range

Part Number: MLD-PLG-PG4-GRY

4 way connector housing. Manufactured from Nylon 66 12.5% glass fill. Mates with MLD-REC-PG4, suitable for crimp terminals CON-PT-STD-1.0 in two of the 4 ways and crimp terminals CON-PT-MAX-4.0/6.0/10.0 in the other 2 ways. Selection of crimp terminal will depend on wire size used. Refer to Terminal listing for more details.

 Product Drawings

Intech connector range

Part Number: MLD-DP-2P-BLK-NP

Unprinted dip moulded connector boot suitable for use with connector housing MLD-PLG-PG2.

Intech connector range

Part Number: MLD-DP-2P-BLK-BR

Dip moulded connector boot printed with 'BRUSH' suitable for use with connector housing MLD-PLG-PG2.

Intech connector range

Part Number: MLD-DP-2P-BLK-VA

Dip moulded connector boot printed with 'VACUUM' suitable for use with connector housing MLD-PLG-PG2.

Intech connector range

Part Number: MLD-DP-4P2R-BLK-NP

Unprinted dip moulded connector boot suitable for use with connectors MLD-PLG-PG4 or MLD-REC-PG2.

Intech connector range

Part Number: MLD-DP-4P2R-BLK-LT

Dip moulded connector boot printed with 'LEFT' suitable for use with connectors MLD-PLG-PG4 or MLD-REC-PG2.

Intech connector range

Part Number: MLD-DP-4P2R-BLK-TR

Dip moulded connector boot printed with 'RIGHT' suitable for use with connectors MLD-PLG-PG4 or MLD-REC-PG2.

Intech connector range

Part Number: MLD-DP-4R-BLK-NP

Unprinted dip moulded connector boot suitable for use with connector housing MLD-REC-PG4.

Intech connector range

Part Number: MLD-DP-4R-BLK-LT

Dip moulded connector boot printed with 'LEFT' suitable for use with connector housing MLD-REC-PG4.

Intech connector range

Part Number: MLD-REC-PG2

2 way connector with solderable pins. Mates with MLD-PLG-PG2.

 Product Drawing

Intech connector range

Part Number: MLD-REC-PG4

4 way connector with solderable pins. Mates with MLD-PLG-PG4.

 Product Drawing

Crimp terminals

Part Number: CON-PT-MAX-4.0

Maxi-Power-Timer crimp receptical (female) to fit tab size 9.53*1.19mm. Maufactured from Copper with a Nickle/Tin plating. Suitable for wire sizes 2.0-4.0mm (13.5-11 awg) and wire insulation to a maximum size of 4.7mm. Supplied as a loose piece allthough  reeled versions are available on request.

 Product Drawing

Crimp terminals

Part Number: CON-PT-MAX-6.0

Maxi-Power-Timer crimp receptical (female) to fit tab size 9.53*1.19mm. Maufactured from Copper with a Nickle/Tin plating. Suitable for wire sizes 4.0-6.0mm (11.5-10 awg) and wire insulation to a maximum size of 5.21mm. Supplied as a loose piece allthough  reeled versions are available on request.
 Product Drawing

Crimp terminals

Part Number: CON-PT-MAX-10.0

Maxi-Power-Timer crimp receptical (female) to fit tab size 9.53*1.19mm. Maufactured from Copper with a Nickle/Tin plating. Suitable for wire sizes 5.0-10.0mm (10-7 awg) and wire insulation to a maximum size of 6.6mm. Supplied as a loose piece allthough  reeled versions are available on request.
 Product Drawing

Crimp terminals

Part Number: CON-PT-STD-1.0-B

Standard power timer crimp receptical to fit tab size 4.75*0.81mm. Manufactred from Tin plated Copper. Suitable for wire sizes 0.5-1.2mm wire with maximum insulation diameter of 2.1mm. Supplied as a loose piece.
 Product Drawing

Crimp terminals

Part Number: CON-PT-STD-1.0

Standard power timer crimp receptical to fit tab size 4.75*0.81mm. Manufactred from Tin plated Copper. Suitable for wire sizes 0.5-1.2mm wire with maximum insulation diameter of 2.1mm. Supplied on a reel of 2300 terminals.
 Product Drawing

Crimp terminals

Part Number: TRM-280095-2-B

Fastin-Faston tab receptical (female) to fit tab size 6.35*0.81mm. Manufactured from Tin Plated Brass. Suitable for wire sizes 0.3-0.9mm (22-18awg) and wire insulation to a maximum size of 3.3mm. Supplied on reels of 4500 terminals.
 Product Drawing

Crimp terminals

Part Number: TRM-160914-2

Fastin-Faston tab receptical (female) to fit tab size 6.35*0.81mm. Manufactured from Tin Plated Brass. Suitable for wire sizes 4.0-6.0mm (11.5-10awg) and wire insulation to a maximum size of 5.2mm. Supplied on reels of 4000 terminals.
 Product Drawing

Crimp terminals

Part Number: TRM-60253-2

Fastin-Faston tab receptical (female) to fit tab size 6.35*0.81mm. Manufactured from Tin Plated Brass. Suitable for wire sizes 1.25-3.0mm (16-12awg) and wire insulation to a maximum size of 5.33mm. Supplied on reels of 10000 terminals.
 Product Drawing

Connector Housing and Boots

Part Number: MLD-969484-1

Actuator Connector housing, 2 way housing suitable for crimp terminals CON-PT-STD-1.0 Refer to terminal listing for more details on this crimp terminal.
 Product Drawing

Connector Housing and Boots

Part Number: MLD-969484-2

Actuator Connector housing, 2 way housing suitable for crimp terminals CON-PT-STD-1.0 Refer to terminal listing for more details on this crimp terminal.
 Product Drawing

Connector Housing and Boots

Part Number: MLD-P79921-LH

Lighting controller connector housing, 4 way housing suitable for crimp terminals CON-PT-STD-1.0 Refer to terminal listing for more details on this crimp terminal.
 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77866-BH

Battery Connector Housing, 2 way housing suitable for crimp terminals CON-PT-MAX-4.0/6.0/10.0, selection of crimp terminal will depend on wire size used. Refer to terminal listing for more details

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77867-CH

Charger Connector Housing, 3 way housing suitable for crimp terminals CON-PT-STD-1.0 Refer to terminal listing for more details on this crimp terminal

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77868-CB

Charger connector boot, suitable for use with connector housing MLD-P77867-CH

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77869-AB

Actuator connector boot, suitable for use with actuator connector housings MLD-969484-1 and MLD-969484-2

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77870-BB

Connector boot suitable for use with connector housings MLD-P77866-BH and MLD-78916-SMH

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77940-MH

Motor Connector Housing, 4 way housing suitable for use with terminals TRM-280095-2-B, TRM-60253-2 or TRM-160914-2. selection of cripm terminal will depend on wire size used, refer to terminal listing for more details.

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77941-MB

Connector boot suitable for use with connector housings MLD-P78213-GBH and MLD-P77940-MH.

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P77980-LB

Lighting controller connector boot, suitable for use with lightling controller connector MLD-3-928247-1

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P78213-GBH

Battery Connector Housing, 2 way housing suitable for crimp terminals TRM-280095-2-B, TRM-60253-2 or TRM-160914-2, selection of crimp terminal will depend on wire size used. Refer to terminal listing for more details

 Product Drawing

Connector Housing and Boots

Part Number: MLD-P78916-SMH

S Drive motor connector housing. 2 way housing suitable for crimp terminals CON-PT-MAX-4.0/6.0/10.0, selection of crimp terminal will depend on wire size used. Refer to terminal listing for more details

 Product Drawing